Hardware-in-the-loop, dynamometer based driver and vehicle simulator.
Walker, M. and Ford R.G.,
SAE international congress, 2000
Paper number 2000-01-0289
Abstract
To evaluate improvements in engine behaviour, particularly with regard to engine management or aftertreatment systems, the engine should be operated in a representative vehicle over a standardised drivecycle. To achieve partial validation in an engine dynamometer test cell, the project described in this paper implements a driver and vehicle simulation which controls, in closed loop, a physical engine, clutch and dynamometer combination. The vehicle can be modelled with either a manual or automatic transmission, and package is implemented in the Matlab/dSPACE rapid prototyping environment.
BibTex Entry
- @InProceedings{,
- author = {Walker, M. and Ford R.G.,},
- title = {Hardware-in-the-loop, dynamometer based driver and vehicle simulator.},
- address = {Detroit},
- booktitle = {SAE international congress},
- note = {Paper number 2000-01-0289},
- year = {2000}
- }
|
![[Dept of Engineering]](http://www.eng.cam.ac.uk/images/house_style/engban-s.gif)
