The Dynamic Effect of Residual Gas Temperature on Combustion Torque at Idle
Ford R.G. and Collings N.,
SAE Fall Fuels and Lubes Conference, 2001
Paper number 2001-01-3558
Abstract
The amount of residual gas present in the cylinder has a well documented effect on the combustion event at idle. The high levels of burnt gas present at low engine speed leads to significant cyclic variability. This paper presents research which indicates that the temperature of the residual gas, which can vary from event to event depending on the spark timing, also has a significant effect on the combustion torque. The more the spark timing is retarded from MBT timing, the more thermal energy is present in the exhaust gas. The idle speed control strategy typically varies the spark to give fast torque actuation for good speed regulation and hence the temperature of the residual gas may change significantly within the space of a few events. The paper shows evidence of the phenomenon (with fixed engine speed and air mass flow) and discusses possible causes. It then proceeds to develop a dynamic model for the behaviour. Finally the model is used in a feedback idle speed controller to compensate for the torque abnormalities. The results of the compensation technique are discussed and suggestions for further research are given.
BibTex Entry
- @InProceedings{,
- author = {Ford R.G. and Collings N.,},
- title = {The Dynamic Effect of Residual Gas Temperature on Combustion Torque at Idle},
- booktitle = {SAE Fall Fuels and Lubes Conference},
- note = {Paper number 2001-01-3558},
- year = {2001}
- }
|
![[Dept of Engineering]](http://www.eng.cam.ac.uk/images/house_style/engban-s.gif)
